- Plat ASTM A-516 Gr.70
Tabel Ukuran, Berat Plat ASTM A-516 Gr.70
| Product | Thickness (Inch) | Size (Feet) | Weight (Kg) |
| Plat A516 5mm | 3/16″ | 5′ x 20′ | 347 |
| Plat A516 6mm | 1/4″ | 5′ x 20′ | 463 |
| Plat A516 8mm | 5/16″ | 5′ x 20′ | 579 |
| Plat A516 9 mm | 3/8″ | 5′ x 20′ | 694 |
| Plat A516 12 mm | 1/2″ | 5′ x 20′ | 926 |
| Plat A516 14 mm | 9/16″ | 5′ x 20′ | 1042 |
| Plat A516 16mm | 5/8″ | 5′ x 20′ | 1158 |
| Plat A516 19 mm | 3/4″ | 5′ x 20′ | 1389 |
| Plat A516 25 mm | 1″ | 5′ x 20′ | 1852 |
| Plat A516 38 mm | 1.5″ | 5′ x 20′ | 2824 |
| Plat A516 45 mm | 1.75″ | 6′ x 20′ | 4012 |
| Plat A516 50 mm | 2″ | 6′ x 20′ | 4458 |
| Plat A516 60 mm | 2.375″ | 6′ x 20′ | 5351 |
| Plat A516 65 mm | 2.625″ | 6′ x 20′ | 5695 |
For plates < 40mm (thinner), normally supply as rolled. Plates supplied > 40mm (above) thick are normalised.
Thickness above 65mm indent 6 – 8 weeks with minimum order
Thickness above 65mm indent 6 – 8 weeks with minimum order
Mechanical Properties
Tensile strength (MPa) : 485-620
Yield strength (MPa) : 260
Elongation in 200mm (min)(%): 17
Elongation in 50mm (min) (%): 21
Thickness (max)(mm) : 205
Tensile strength (MPa) : 485-620
Yield strength (MPa) : 260
Elongation in 200mm (min)(%): 17
Elongation in 50mm (min) (%): 21
Thickness (max)(mm) : 205
Features:
Uniform surface
High tensile strength
Corrosion resistance
Sturdy construction
Temperature resistance
Uniform surface
High tensile strength
Corrosion resistance
Sturdy construction
Temperature resistance
Plat Stainless Steel 304
Grades
Stainless steel grade 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel. Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively.
Stainless steel grade 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel. Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively.
SUS 304 stainless steel is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans.
SUS 304L is the low carbon version of 304. It is used in heavy gauge components for improved weldability. Some products such as plate and pipe may be available as “dual certified” material that meets the criteria for both 304 and 304L. 304H, a high carbon content variant, is also available for use at high temperatures.
Property data given in this document is typical for flat rolled products covered by ASTM A240/A240M. ASTM, EN or other standards may cover products sold. It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this datasheet.
Equivalents
DINX5CrNi1810, AISI 304, EN X4CrNi18-10, BS304S31, ISO – 11
DINX5CrNi1810, AISI 304, EN X4CrNi18-10, BS304S31, ISO – 11
Availability
Stainless steel SUS 304 is available in Sheet, Bar, Wire, Rod, Strip, tube, pipe, and Channel.
Stainless steel SUS 304 is available in Sheet, Bar, Wire, Rod, Strip, tube, pipe, and Channel.